
New TopShim run:

version = topshim 2.0.0
date = 2022-06-08
time = 11:44:49.803
command = topshim  convcomp tunea

FINE SHIMMING

Parameters:

probe = Z168793_0014
solvent = D2O
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 4.70 ppm

Results:


1D Shimming:
Iteration  1: FWHM Before=39.7 Hz, Target= 0.2 Hz, After= 8.0 Hz
Iteration  2: FWHM Before= 8.0 Hz, Target= 0.2 Hz, After=10.7 Hz
Iteration  3: FWHM Before=10.7 Hz, Target= 0.2 Hz, After=14.7 Hz
Iteration  4: FWHM Before=14.7 Hz, Target= 0.2 Hz, After= 3.2 Hz
Iteration  5: FWHM Before= 3.2 Hz, Target= 0.2 Hz, After= 0.3 Hz
Iteration  6: FWHM Before= 0.3 Hz, Target= 0.2 Hz, After= 0.3 Hz
Iteration  7: FWHM Before= 0.3 Hz, Target= 0.2 Hz, After= 0.6 Hz
Iteration  8: FWHM Before= 0.6 Hz, Target= 0.2 Hz, After=12.6 Hz
Iteration  9: FWHM Before=12.6 Hz, Target= 0.2 Hz, After= 3.6 Hz
Iteration 10: FWHM Before= 3.6 Hz, Target= 0.2 Hz, After= 0.2 Hz
Iteration 11: FWHM Before= 0.2 Hz, Target= 0.2 Hz, After= 2.9 Hz
Iteration 12: FWHM Before= 2.9 Hz, Target= 0.2 Hz, After=10.7 Hz
Iteration 13: FWHM Before=10.7 Hz, Target= 0.2 Hz, After= 0.3 Hz
Iteration 14: FWHM Before= 0.3 Hz, Target= 0.2 Hz, After= 0.3 Hz
Iteration 15: FWHM Before= 0.3 Hz, Target= 0.2 Hz, After= 0.2 Hz
RMSD between target and map above threshold but maximum number of iterations reached. Halting shimming.

Using the best result as the final shim state.

Lineshape quality factor (1D spectrum, spinning) = 0.402


Performing tune after shimming
tune lock level increase = 1.0

shim changes: 
Z	+719
Z2	+133
Z3	+790
Z4	+1641
Z5	+2490
Z6	+4388
Z7	-4114
Z8	-42153
X	+128
XZ	+7
Y	+7
YZ	+7

duration = 2 min 38 sec
completed successfully
finished Wed Jun  8 11:47:27 2022


========================================================================
